Tough Coat by Fusion Mineral Paint is perfect for those high traffic surfaces such as table tops, our non-yellowing water-based wipe on sealer, applied with Fusion Applicator pads, roll or brush or spray.

How To Apply Fusion Mineral Paint Tough Coat

Swirl gently before use to ensure product is fully mixed but do not shake.
If applying to a recently painted surface, allow 12-24 hours of drying time for painted furniture and surfaces before applying.
Apply two thin coats 2-4 hours apart, avoid over working the product and apply in the same direction not back and forth.
In humid areas, longer drying times may be required.
Dampen your applicator with water prior to using, highly recommend the new tough coat applicator sponge.

Size | 500ml

Finish

Glossy or Flat ( Flat does have some low lustre sheen )

Coverage

500ml covers about 75 sq. ft (7m2)

Top Tips

Avoid using over dark colours - can be tricky to achieve a good finish you may see clouding / streak from the matting agent in the Matt. Use gloss for more clarity.

Other alternatives for darker colours - Fusion Stain and finishing oil in natural Fusion Hemp oil

Alternatively, Flat High Performance Topcoat from our General Finishes Range works great over any of our paint ranges.

Tough Coat - Fusion Mineral Paint