General Finishes High Performance Top Coat / varnish is one of the hardest, most durable polyurethane top coats available to consumers and trade. Because it contains consumer-friendly characteristics of Polyacrylic Blend - flows and levels easily and has great adhesion and in addition it contains a UV stabiliser to protect the top coat and underlying stains from breaking down or fading from exposure to sunlight.

Also the finish is extremely durable enough to be used on floors. This acrylic and polyurethane topcoat will produce a beautiful furniture quality finish on any project. Cleans up with soap and water.

***Highly recommended by Shabby Nook***

Winner of Fine Woodworking's "Best Overall Choice Award," High Performance Topcoat was voted as the hardest, most durable consumer polyurethane topcoat.

General Finishes High Performance Top Coat Top Tips*

The higher the sheen the harder it is, the lower the sheen the less hardy it is but, that being said, General finishes top coats are still the best around for durability, shinier finishes are more resistant to scrubbing but all finishes are wipeable.

If you want a dead matt finish - Flat out Flat would be the one for this look. However over dark colours this may look cloudy due to the amount of matting agent to dull the sheen level.

Flat - does have a low lustre finish so is not a dead flat matt but does look lovely!

Satin - Super hardy ideal for kitchens - but can go to a glossy look if applying 3 coats or more. If you want the hardyness of a satin but a low lustre finish, apply satin first then use Flat over the top.

Higher sheen levels on mid to dark colours may slightly enhance the colour of paint because they appear more intense/darker and is for all satin - gloss topcoats not just general finishes. - trick of the eye as they say

BASIC FEATURE
Product Colors	Water White in can (dries clear)
Base Type	Water
Ambering	No
Sheen	Flat (5-10), Satin (25-35), Semi-Gloss (50-60), Gloss (85+)
Interior or Exterior	Interior only
Type	Urethane/Acrylic Blend
APPLICATION
Coats	2 -3 coats
Application Method	Brush, Roll, Spray
Brushable	Yes
Usable over existing finishes	Yes
Sprayable	Yes
Spray Tip Sizes	HVLP 1.1mm-1.3mm
DRY TIME
Dry Time - Touch	30+ min.
Dry Time - Recoat	2+ hr
Dry Time - Light Use	7-10 days
Dry Time - Cure	21 days
CONTENTS
Can Sizes	Pints, Quarts, Gallons, 5 Gallon pails
Coverage	65-75 sq.ft./pint, 125-150 sq.ft./quart, 500-600 sq.ft./gallon
TECHNICAL DATA
Viscosity	Medium
Viscosity (cPs)	350-450
Weight Solids	25%
VOC	Flat: 170 g/L Satin: 172 g/L Semi-Gloss: 173 g/L Gloss: 250 g/L

473 ml - General Finishes High Performance Top coat / Varnish