Annie Sloan Satin Paint In Cambrian Blue has been developed to offer a contemporary looking, one step solution to painting wooden and metal furniture. There is no need to apply Chalk Paint™ Wax or Lacquer to Annie Sloan Satin Paint

Cambrian Blue is a cool-toned steely blue, like a dark denim.

Like dark denim, this perennially cool and hard-working shade will go with everything. The name references the precious clay found in Northern Russia, prized as the rarest and most valuable clay in the world. Cambrian Clay contains a high concentration of silver chemical elements, which is emulated with the light reflecting grey pigments apparent in this hue.

Annie Sloan Satin Paint is formulated for interior use on wood and metal, and has two main purposes. Firstly, it’s been designed to be used in conjunction with Annie Sloan Wall Paint on skirting, millwork, architraves, doors and other busy areas of the home. Secondly, it’s been developed to offer a contemporary looking one step solution to painting wooden and metal furniture.

Annie Sloan Satin Paint is a washable, wipeable, quick drying, water based, low VOC interiors paint with a 10% sheen. It’s certified as Toy Safe with an A+ EU Indoor Air Rating.

Annie Sloan Satin Paint Coverage Size 750ml

750ml is enough to cover approximately 11 square metres. Actual coverage is dependent on surface porosity and application. 10% sheen

How To Prep For Annie Sloan Satin Paint

We recommend using Annie Sloan Soft Flat™ Brushes or Sponge Roller if you want a smoother fast application on large flat surfaces. Checkout more accessories in Annie Sloan tools & brushes

All surfaces must be clean, dry and free from any dust, debris or oil-based contaminants. We advise using a water-based detergent such as sugar soap to thoroughly clean.
Ensure you have cleaned the surface really well, we recommend Grime Cutter our go to cleaner
Always stir Annie Sloan Satin Paint thoroughly before using
METAL PREP: Thoroughly sand the surface, clean, and degrease any unpainted metal surfaces. Previously painted metal surfaces should be sanded back to ensure the removal of any loose or flaking paint. Specialist metal primers should be used to ensure longevity of Annie Sloan Satin Paint and to protect the metal underneath.
NEW INTERIOR WOOD Prep: For best results when painting fresh woodwork use a diluted coat of Annie Sloan Satin Paint as a base layer.
PREVIOUSLY PAINTED INTERIOR WOOD Prep: Remove any unsound, peeling or flaking paint. Use a diluted coat of Annie Sloan Satin Paint if making a drastic colour change.
PAINTING OVER PREVIOUSLY PAINTED GLOSS PAINT, WAXED OR LACQUERED SURFACES Prep: Thoroughly sand, clean and degrease any surfaces previously painted with gloss paint, wax or lacquer before using Annie Sloan Satin Paint. Wax should be completely removed with white spirits
If you see bleed through appear in your light colours apply a coat of Annie Sloan lacquer to seal or treat with a stain blocking primer

How To Apply Annie Sloan Satin Paint

For further information and tips you checkout the Satin Paint Fact Sheet

Recommended Brush Application:

Apply a reasonably thick coat of Annie Sloan Satin Paint using a high quality fine tipped synthetic bristled brush (eg Annie Sloan Flat Brushes )
Apply the paint in one direction (i.e vertically) and then the other (i.e horizontally) using a cross-hatch technique to achieve the desired coverage
Avoid overworking the paint, as this will cause the paint to degrade.
Full coverage should be achieved after 2 coats, although a third may be necessary if making a dramatic colour change. Or using any of the "whites"

Application By Roller:

Annie Sloan Satin Paint can be applied using the Annie Sloan foam rollers to achieve a good finish with minimal stippling or “orange peel” appearance.

Rollers will coat the surface with a thinner layer of paint than a brush would, therefore additional coats may be required to achieve full coverage.

Drying Time & Re Application:

Touch dry in 1 hour, though this is dependent on environmental factors and the thickness with which the paint has been applied. Recoat once touch dry.’

Recommended 2 -3 coats (3 if an extreme colour change is needed).

Allow up to 14 days to “cure” and reach optimum hardness and durability.

Allow extra drying time when using Annie Sloan Satin Paint in bathrooms. Surfactant leaching can occur when newly painted surfaces are exposed to humidity or steam before the paint has had a chance to fully dry.

When painting flooring, outdoors, or to create decorative effects, we recommend Chalk Paint™ by Annie Sloan. Click here to explore the Chalk Paint™ range.

Please note that colours shown here will vary depending on screen settings. We cannot guarantee that paint colours will exactly match the colour you see on screen. If you are in doubt, please order a colour card - awaiting new colour cards for satin paint

Cambrian Blue Annie Sloan Satin Paint 750ml - New!